How to fix Windows 7 or Vista Boot errors - problems. This tutorial will show you how to run and use the Windows “Startup Repair” (Repair Your Computer) option to fix these problems. Keep in mind that this tutorial is mostly effective when your boot device (e.

How to fix Windows 7 or Vista Boot errors - problems. This tutorial will show you how to run and use the Windows “Startup Repair” (Repair Your Computer) option to fix these problems. Keep in mind that this tutorial is mostly effective when your boot device (e.

Press Ctrl + Alt + Del to restart”Boot Error Condition No. File: \Boot\BCD Status: 0xc. Info: The Windows Boot Configuration Data file is missing required information”Boot Error Condition No. So before continuing to repair your system using this tutorial, check the boot order setting from Bios. Step 1: Ensure that your computer starts from the proper boot device. Enter the BIOS settings by pressing “DEL” or “F1” or “F2” or “F1. Inside Bios menu, find “Boot Order” setting.

Change various startup and shutdown settings. Autorun Angel is a powerful cloud autorun manager and security analyzer that will help protect your computer from. A Clean Boot is a method of starting Microsoft Windows in Normal Mode (as opposed to Safe Mode) with the minimum of drivers, startup programs and services. At this point Windows tries to find and repair Startup problems automatically. If so, then a message appears on your screen that informs you that. Dual-boot Repair Windows 10 - fix Windows boot manager/loader - Windows 10/8.1/7/Vista/XP and Server 2003/2008/2012 on BIOS and UEFI firmware.

This setting is commonly found inside “Advanced settings”. Check if your system boots from the proper device: . Save and Exit Bios Setup. See if your computer boots normally into Windows. If not, continue to Step 2. Step 2: Change BIOS Boot order to boot from your CD/DVD device.

Dual-boot Repair utility for Windows 8, Windows 7 and Vista. Dual-boot Repair will automatically fix boot environment of systems based on Windows 7, Windows 8 or. How to Manage Startup Programs in Windows XP, Windows Vista and Windows 7 Published: Jun 27, 2004 Updated : Aug 18, 2010 Send your feedback. It's a good practice to. Table of Contents. Overview of the Windows Vista Repair options; How to perform an automatic repair of Windows Vista using Startup Repair; Advanced Tools overview.

Before continuing to the instructions below, your must have one of the following DVD media in place: * The above media will be mentioned at the rest of this article as “Recovery Media” for brevity reasons. Enter the BIOS settings by pressing “DEL” or “F1” or “F2” or “F1. In Bios menu, find “Boot Order” setting.

This setting is commonly found inside “Advanced settings”. Change the boot order to first boot from “CD/DVD Drive”. Save and Exit Bios Setup. Step 3. Boot your computer from the CD/DVD drive.

Placethe “Recovery Media” (Windows 7 Installation DVD or the System Repair Disk)on your CD/DVD drive. Press Any key to boot from CD or DVD, when the corresponding message appears on your screen. How to fix your Windows 7 installation using Startup Repair. Step 4. Repair your Windows 7 boot problems using Startup Repair. Choose your preferred Language, Time and Keyboard settings and hit “Next”.

At the next screen choose the “Repair your Computer” option. At this point Windows tries to find and repair Startup problems automatically. If so, then a message appears on your screen that informs you that: “Windows found problems with your computer’s startup options. Do you want to apply repairs and restart your computer?”. If the above message appears on your screen, then press the “Repair and restart your computer” button to apply changes and restart your computer. If your computer doesn’t start again then put the “Recovery Media” into your CD/DVD drive, restart your computer (press “CTRL+ALT+DEL” or press the “Reset” button) and run “Startup Repair” manually.

To do that: 3. At system recover options leave the “Use recovery tools that can help fix problems starting Windows. Select the “Startup Repair” option. Now let the “Startup Repair” to check your computer for problems. At this point two things (cases) can happen: Case No.

Windows can find problems and can repair them. If this happens: Remove the Recovery disk from the DVD drive. Press the “Repair and restart your computer” button.

See if your computer can boot to Windows normally. Attention: You have to run “Startup Repair” option two more times, before continuing to the next step because “Startup Repair” in most cases must run three (3) times until it fixes all problems. If the problem persists put your “Recovery Media” on the CD/DVD drive again and continue to the next Step. Case No. 2: Startup Repair could not detect a problem. If this happens, then: Choose the”View Advanced options for system recovery and support” link and.

Continue to the next Step. How to fix Master Boot Record from command prompt (bootrec): Step 5. Fix the master boot record using “bootrec” command.(With your “Recovery Media” placed on the CD/DVD drive boot to “Command Prompt”). At the following screen, select “Command Prompt”.: 2a. First repair the Master Boot Record. Inside the command prompt window, type the following command and press “Enter”: (The System should return the following message that informs you that “The operation completed successfully”.)2b. Next fix the System Partition Boot Sector and the boot configuration data.

To do that, type the following command and press “Enter”. Note*: The above commands is also used to fix the following boot error/problem: “BOOTMGR is missing. Press Ctrl + Alt + Del to restart”(The System should return the following message that informs you that “The operation completed successfully”.)3. Remove the “Recovery Media” from the CD/DVD drive and restart your computer. If your computer fails to start, continue to Step 6.

How to fix Boot Configuration Data information. Step 6: Fix (Re. Build) the corrupted Boot Configuration Data (BCD) folder. Scan your system for compatible Windows 7 installations and add them to boot configuration data (BCD) folder. To do that, you must boot with the “recovery Media” inside command prompt window, so type the following command and press “Enter”. The System should return one of the following two messages: A.

Message No. 1: “Scanning all disk for Windows Installations. Please wait, since this may take a while. To do that, type the following commands in order: bcdedit /export C: \bcdbackupc: cd bootattrib bcd - s - h - rren c: \boot\bcd bcd. The system should return the follow message: “? Yes< Y> / No< N> /All< A> ”Type “Y” (Yes)Close “command prompt” window, remove the “Recovery Media” from CD/DVD drive and restart your computer,B. Message No. 2: “Scanning all disk for Windows Installations. Please wait, since this may take a while?

Yes< Y> / No< N> /All< A> ”Action: Type “Y” (Yes), remove the repair disk, close “command prompt” window and restart your computer. Normally your system should load Windows without problems. Additional Info/Action: If you have installed Windows XP on the same computer where you have previously installed Windows 7 and you cannot boot anymore into Windows 7 OS, then you must type this command to fix the Windows 7 bootloader: How to change Active partition in Windows 7, Vista. Step 7: Change Active Partition(With your “Recovery Media” placed on the CD/DVD drive boot to “Command Prompt”).

In the command prompt window type: 2. In “DISKPART” prompt type: 3.

Now type the following command and then press “Enter”.: select disk X  (Where “X “means the number of disk that contains the Operating System – e. Then type the following command and press “Enter”. From the available partitions, select the partition that you want to make active (e. Finally type the following command and press “Enter” to make your partition active. At this point, the system should return with the following message: “Disk. Part marked the current partition as active.”7. Close “command prompt” window, remove the “Recovery Media” from CD/DVD drive and restart your computer.

Windows 10 Manager v2.1.1 The complete solution to optimize, tweak, repair and clean up Windows 10. Windows 10 Manager is an all-in-one utility for Microsoft Windows. Reset the BIOS to Default Values. If your computer is set to first attempt to boot to another device, this may cause issues with successfully booting to Windows. More from my site. Windows Recovery Essentials: A Recovery And Repair CD For Windows From NeoSmart; How To Open Hidden System Reserved Partition In Windows 7.

If your computer fails to start, boot from the “Recovery Media” again and run the “Startup Repair” (Step 4) and let Windows fix Startup problems. We have experience with this software and we recommend it because it is helpful and useful). If this article was useful for you, please consider supporting us by making a donation.

Even $1 can a make a huge difference for us in our effort to continue to help others while keeping this site free.